Jump to content

Trinal

From The Talos Principle Wiki
Trinal
Identifier: Abyss-19
Area: Into the Abyss
Previous Puzzle: Radiating Choice
Next Puzzle: Interception

Trinal is the nineteenth puzzle in Into the Abyss, part of the Road to Elysium expansion for The Talos Principle 2.

Puzzle Elements


Overview

The large circular puzzle room is composed of a central area has a missing Fan leading to a large platform overhead, as well as three Blue doors controlled by Pressure plates. On the left and right are symetrical-looking area with a blue and green Emitter respectively, one Connector and a set of two doors connecting to the back area. In this back area are two Clones and a set of Pressure plates that lead back to the central area. A Fan can propel the player on a ledge that goes all around the room, each side leading to a Pressure plate used to reveal six Receivers that must all be powered to gain access to the underground room where the Progress Wheel lies.

Hints

If you have trouble getting started:

[ hint ]
The first order of business is to free the two Clones trapped in the back area. The one on the right is not too hard to reach.

If you can't reach the second Clone:

[ hint ]
Maybe the Connectors overhead can provide the elevation change you need to avoid intersecting lasers?

TODO

Solution

[ solution ]
  • Take the Connector and place it on the Pressure plate towards the blue Emitter.
    Take the Connector and place it on the Pressure plate towards the blue Emitter.
  • Take the Connector that is inside, connect the blue Emitter to the blue Receiver behind the Blue door and place it down on the nearby Pressure plate.
    Take the Connector that is inside, connect the blue Emitter to the blue Receiver behind the Blue door and place it down on the nearby Pressure plate.
  • Take the first Connector and bring it to the Pressure plate that leads to the green Emitter.
    Take the first Connector and bring it to the Pressure plate that leads to the green Emitter.
  • Take the green Connector that is inside, connect it to the green Emitter, the green Receiver nearby as well as the connector on the upper platform. Place it down on the Pressure plate.
    Take the green Connector that is inside, connect it to the green Emitter, the green Receiver nearby as well as the connector on the upper platform. Place it down on the Pressure plate.
  • Pick up the Connector from the other Pressure plate and link the blue Connector across the room to the blue Receiver nearby.
    Pick up the Connector from the other Pressure plate and link the blue Connector across the room to the blue Receiver nearby.
  • Access the back area and take control of the Clone.
    Access the back area and take control of the Clone.
  • Activate the Switch to open the nearby Blue door.
    Activate the Switch to open the nearby Blue door.
  • Take control of Byron again.
    Take control of Byron again.
  • Pick up the nearby blue Connector, walk into the opposite room and link the green Connector from the upper platform to the green Receiver nearby.
    Pick up the nearby blue Connector, walk into the opposite room and link the green Connector from the upper platform to the green Receiver nearby.
  • Access the back area and take control of the other Clone.
    Access the back area and take control of the other Clone.
  • Activate the Switch to open the nearby Blue door.
    Activate the Switch to open the nearby Blue door.
  • Take the Fan blades and place them on one of the Pressure plates. Position the other Clone on the second plate.
    Take the Fan blades and place them on one of the Pressure plates. Position the other Clone on the second plate.
  • Take the Connector into the back area.
    Take the Connector into the back area.
  • Place the Fan blades on the Fan that leads to the left side, where Byron is.
    Place the Fan blades on the Fan that leads to the left side, where Byron is.
  • Take the Connector and jump onto the Fan.
    Take the Connector and jump onto the Fan.
  • Drop the Connector through the opening in the grate and take control of Byron.
    Drop the Connector through the opening in the grate and take control of Byron.
  • Take the Connector and bring it to the central room. Link the green Connector to the green Receiver that leads to the back room and place it down on the Pressure plate.
    Take the Connector and bring it to the central room. Link the green Connector to the green Receiver that leads to the back room and place it down on the Pressure plate.
  • Take the green Connector from the left room, link the blue Connector to the blue Receiver that leads to the back room.
    Take the green Connector from the left room, link the blue Connector to the blue Receiver that leads to the back room.
  • Walk into the back area and take control of the Clone that stayed on the Pressure plate.
    Walk into the back area and take control of the Clone that stayed on the Pressure plate.
  • Position both Clones on the Pressure plates and take control of Byron.
    Position both Clones on the Pressure plates and take control of Byron.
  • Take the Fan blades and place them on the fan in the central room.
    Take the Fan blades and place them on the fan in the central room.
  • Fly onto the upper platform. Take one of the Connectors there and link the blue Emitter to the blue Receiver that leads to the back area.
    Fly onto the upper platform. Take one of the Connectors there and link the blue Emitter to the blue Receiver that leads to the back area.
  • Take the other Connector and do the same thing on the green side.
    Take the other Connector and do the same thing on the green side.
  • Jump back down, take the blue Connector from the central room and place it on the Pressure plate that leads to the blue side.
    Jump back down, take the blue Connector from the central room and place it on the Pressure plate that leads to the blue side.
  • Take the blue Connector from inside the left room, bring it onto the upper platform and connect it to the red Emitter.
    Take the blue Connector from inside the left room, bring it onto the upper platform and connect it to the red Emitter.
  • Move the Connector in the central room to the Pressure plate on the green side.
    Move the Connector in the central room to the Pressure plate on the green side.
  • Take the green Connector from inside the right room, bring it to the upper platform and link the red Connector to the red Receiver by the Fan in the back area.
    Take the green Connector from inside the right room, bring it to the upper platform and link the red Connector to the red Receiver by the Fan in the back area.
  • Jump back down, and bring the Connector in the central area to the back room.
    Jump back down, and bring the Connector in the central area to the back room.
  • Fly back up onto the upper platform and take control of one of the Clones from there.
    Fly back up onto the upper platform and take control of one of the Clones from there.
  • Place the Connector onto the Pressure plate the Clone left to keep the door open.
    Place the Connector onto the Pressure plate the Clone left to keep the door open.
  • Fetch the Fan blades from the central area, place them on the fan in the back area and jump up.
    Fetch the Fan blades from the central area, place them on the fan in the back area and jump up.
  • From there, take control of the Clone below.
    From there, take control of the Clone below.
  • Jump up with the second Clone.
    Jump up with the second Clone.
  • Walk all the way around to one of the Pressure plates and take control of the other Clone from there.
    Walk all the way around to one of the Pressure plates and take control of the other Clone from there.
  • Walk all the way around to the other Pressure plate and take control of Byron on the upper platform.
    Walk all the way around to the other Pressure plate and take control of Byron on the upper platform.
  • Take one of the Connectors, connect it to the blue Emitter as well as both blue Receivers by the entrance. Place it down on the outside of the platform, at around 1 o'clock.
    Take one of the Connectors, connect it to the blue Emitter as well as both blue Receivers by the entrance. Place it down on the outside of the platform, at around 1 o'clock.
  • Take another Connector, connect it to the red Emitter as well as both red Receivers by the entrance. Place it down on the outside of the platform, right in the middle.
    Take another Connector, connect it to the red Emitter as well as both red Receivers by the entrance. Place it down on the outside of the platform, right in the middle.
  • Take another Connector, connect it to the green Emitter as well as both green Receivers by the entrance. Place it down on the outside of the platform, at around 11 o'clock. Jump down and finish the puzzle.
    Take another Connector, connect it to the green Emitter as well as both green Receivers by the entrance. Place it down on the outside of the platform, at around 11 o'clock. Jump down and finish the puzzle.

Miscellaneous

Nightmare hologram

The red hologram, just right of the entrance.

Right of the entrance, a red hologram for the Nightmare 11 audio log can be found.

Retrieved from "https://taloswiki.org/index.php?title=Trinal&oldid=8290"