Stylite: Difference between revisions
Appearance
Created page with "{{Infobox TTP2 Puzzle |identifier=Abyss-7 |image = Abyss-7.jpg|area=Into the Abyss |previous=Voyager |next=Metaphora }} '''Stylite''' is the seventh puzzle in Into the Abyss, part of the Road to Elysium expansion for The Talos Principle 2. == Puzzle Elements == {{Puzzle Element List}} == Overview == == Hints == == Solution == Category:TTP2 Into the Abyss Puzzles Category:TTP2 Into the Abyss Category:Puzzles" |
RichouHunter (talk | contribs) |
||
Line 5: | Line 5: | ||
|next=[[Metaphora]] | |next=[[Metaphora]] | ||
}} | }} | ||
[[Stylite]] is the seventh puzzle in [[Into the Abyss]], part of the [[Road to Elysium]] expansion for The Talos Principle 2. | |||
== Puzzle Elements == | == Puzzle Elements == | ||
{{Puzzle Element List}} | {{Puzzle Element List|Blue door=true|Clone=true|Connector=true|Fan=true|Pressure plate=true|Receiver=true}} | ||
== Overview == | == Overview == | ||
The [[Progress Wheel]] is located on a platform that requires a red laser and a [[Fan]] to reach. In the main area, a red [[Emitter]] and a [[Fan]] with detachable blades can be found. Finally, a [[Clone]] is locked from the inside in a nearby cell. | |||
== Hints == | == Hints == | ||
{{ProgressiveHint|If you have trouble getting started|Notice that the [[Fan]] blades are detachable and can be used for [[Pressure plate]]s. | |||
}}{{ProgressiveHint|If you have trouble keeping [[Byron]] on the ledge|Keep an eye on your resources: the [[Fan]] blades must be on for you to jump, and the [[Clone]] must be free to help with later steps. That leaves you with two [[Connector]]s to open both [[Blue door]]s and power the Fan. | |||
}}{{ProgressiveHint|If you can't get the [[Fan]] blades onto the ledge.|Remember that you can take an item off a [[Clone]]'s hand if it is close enough. | |||
}} | |||
== Solution == | == Solution == | ||
{{Spoiler|2=solution| | |||
<gallery> | |||
File:Abyss - 7 - 1.jpg|Take control of the [[Clone]]. | |||
File:Abyss - 7 - 2.jpg|Place the [[Clone]] on the [[Pressure plate]] and take control of [[Byron]]. | |||
File:Abyss - 7 - 3.jpg|Take the [[Connector]] and link the [[Emitter]] to the [[Receiver]] inside the [[Clone]]'s cell. | |||
File:Abyss - 7 - 4.jpg|Jump onto the [[Fan]]. | |||
File:Abyss - 7 - 5.jpg|Jump down the ledge and place the [[Connector]] on the [[Pressure plate]]. | |||
File:Abyss - 7 - 6.jpg|Take the [[Fan]] blades and swap them for the [[Connector]] on the [[Pressure plate]]. | |||
File:Abyss - 7 - 7.jpg|Swap the [[Connector]] for the [[Clone]] on the other [[Pressure plate]], and connect it to the nearby [[Receiver]]. | |||
File:Abyss - 7 - 8.jpg|Take the second [[Connector]], swap it for the [[Fan]] blades, and link the [[Emitter]] to the other Connector. Put the Fan back in place. | |||
File:Abyss - 7 - 9.jpg|Jump back onto the ledge. | |||
File:Abyss - 7 - 10.jpg|From the ledge, take control of the [[Clone]]. | |||
File:Abyss - 7 - 11.jpg|Swap the [[Fan]] blades for the [[Connector]] on the [[Pressure plate]]. | |||
File:Abyss - 7 - 12.jpg|Link the [[Emitter]] to the [[Receiver]] by the [[Progress Wheel]] and put it on the [[Fan]] platform. | |||
File:Abyss - 7 - 13.jpg|Take the [[Fan]] blades, climb on the rubble and take control of [[Byron]]. | |||
File:Abyss - 7 - 14.jpg|Take the [[Fan]] blades from the [[Clone]]'s hands and put them on the Fan. | |||
File:Abyss - 7 - 15.jpg|Position the [[Clone]] on the [[Pressure Plate]] to let the red laser through and take control of [[Byron]] to finish the puzzle. | |||
</gallery> | |||
}} | |||
[[Category:TTP2 Into the Abyss Puzzles]] | [[Category:TTP2 Into the Abyss Puzzles]] | ||
[[Category:TTP2 Into the Abyss]] | [[Category:TTP2 Into the Abyss]] | ||
[[Category:Puzzles]] | [[Category:Puzzles]] |
Revision as of 11:09, 26 December 2024
Stylite | |
---|---|
Identifier: | Abyss-7 |
Area: | Into the Abyss |
Previous Puzzle: | Voyager |
Next Puzzle: | Metaphora |
Stylite is the seventh puzzle in Into the Abyss, part of the Road to Elysium expansion for The Talos Principle 2.
Puzzle Elements
Overview
The Progress Wheel is located on a platform that requires a red laser and a Fan to reach. In the main area, a red Emitter and a Fan with detachable blades can be found. Finally, a Clone is locked from the inside in a nearby cell.
Hints
If you have trouble getting started:
[ hint ]
Notice that the Fan blades are detachable and can be used for Pressure plates.
If you have trouble keeping Byron on the ledge:
[ hint ]
Keep an eye on your resources: the Fan blades must be on for you to jump, and the Clone must be free to help with later steps. That leaves you with two Connectors to open both Blue doors and power the Fan.
If you can't get the Fan blades onto the ledge.:
[ hint ]
Remember that you can take an item off a Clone's hand if it is close enough.
Solution
[ solution ]
-
Take control of the Clone.
-
Jump onto the Fan.
-
Jump down the ledge and place the Connector on the Pressure plate.
-
Swap the Connector for the Clone on the other Pressure plate, and connect it to the nearby Receiver.
-
Jump back onto the ledge.
-
From the ledge, take control of the Clone.
-
Position the Clone on the Pressure Plate to let the red laser through and take control of Byron to finish the puzzle.