Elevation: Difference between revisions
RichouHunter (talk | contribs) mNo edit summary |
m Text replacement - "== Puzzle Elements ==" to "== Puzzle elements ==" |
||
| Line 9: | Line 9: | ||
'''Elevation''' is a lost puzzle in the Grasslands Ring area of The Talos Principle 2. | '''Elevation''' is a lost puzzle in the Grasslands Ring area of The Talos Principle 2. | ||
== Puzzle | == Puzzle elements == | ||
{{Puzzle Element List|Blue door=true|Connector=true|Hexahedron=true|Pressure plate=true|Purple barrier=true|Receiver=true|RGB converter=true}} | {{Puzzle Element List|Blue door=true|Connector=true|Hexahedron=true|Pressure plate=true|Purple barrier=true|Receiver=true|RGB converter=true}} | ||
Latest revision as of 08:22, 9 December 2023
| Elevation | |
|---|---|
| |
| Identifier: | East 1-Δ1 |
| Area: | Grasslands Ring |
| Puzzle Type: | Lost |
| Previous Puzzle: | Entanglement |
| Next Puzzle: | Interconnectivity |
Elevation is a lost puzzle in the Grasslands Ring area of The Talos Principle 2.
Puzzle elements
Overview
To reach this puzzle, follow the path to the right of Puzzle 4.
As you enter the puzzle, you find a large room with a connector and a pair of emitters, a blue and a red one. There is a room in one corner that is accessible through a purple barrier and a blue door that has an RGB converter and a green emitter inside. Further back is a room with a pressure plate in front of it with a hexahedron inside, and a blue receiver controlling access to the progress wheel
Hints
A basic hint:
[ hint ]
Since the name of the puzzle is Elevation, at some point you will have to raise one of the equipment a little bit.
If you're struggling to get started:
[ hint ]
The first job is to bring the hexahedron and the RBG converter out into the main room.
If you can't seem to aim the lasers:
[ hint ]
Remember that purple barriers allow lasers through, but blue doors don't
If your rays are intersecting:
[ hint ]
Raise the equipment closest the emitters, this gives it enough of an angle so that the lasers aimed from far away don't intersect
If you got elevation, but not can't go to the back room:
[ hint ]
It is possible to grab the hexahedron while some equipment is on top of it. The equipment will maintain its connections and won't disconnect, even momentarily.
Solution
[ solution ]
-
Take the Connector and link the blue Emitter to the blue Receiver through the purple barrier. -
Bring the RGB Converter on the Pressure Plate. -
Take the Hexahedron to the Connector and reposition it on top of the Hexahedron. -
Connect the RGB Converter to the red and green Emitters as well as the blue Receiver. Place it down on the left side so that the green beam doesn't cross the blue beam from the Connector. -
Disconnect the Connector and bBring the Hexahedron onto the Pressure Plate. -
Use the Connector to link the Converter to the blue Receiver by the Progress Wheel.
